Skip to content

We look before we quote. Free window quotes at (214) 239-1068

Dallas · University Park · Highland Park · Cockrell Hill

(214) 239-1068
Two installers fitting a white-framed sliding glass patio door into a brick home's back wall on a covered concrete patio, with aluminum trim and a tool bag nearby

ServicesPatio Doors

New Patio Doors for Dallas Homes

When a patio door sticks, lets water in or turns the room into an oven, something is causing it. We track that cause down, then install a sliding or hinged door that glides freely and closes snug. Our team brings over 10 years of experience to the job.

When a new patio door is the right call

Patio doors take more abuse than any window in your home. They open dozens of times a day, they carry a lot of glass, and the track sits right where water collects. When one starts fighting you, it is easy to blame the door. Sometimes the door is the problem. Sometimes the opening has shifted, there is no sill pan, or the threshold was set out of level the day it went in.

So we look before we quote. We check the frame for square, press on the sill and subfloor for soft spots, and run the panels to see where they bind. If the opening needs work, we tell you and it goes in the quote. A new door set into a bad opening will act like the old one within a couple of years.

We install sliding glass doors and hinged French-style doors in several frame materials. Our company is AAMA certified and fully insured, and we will walk you through the choices without steering you to the priciest one.

What the job includes

Opening check before the quote
We measure the opening in several spots, check it for level and square, and probe the sill for rot. That tells us what size door to order and whether the framing needs attention first.
Old door tear-out
We pull the panels and the old frame, cover your floors and nearby furniture, and haul everything away.
Pan under the threshold
Before the frame goes down, we set a pan that tips toward the outside, then tape and flash both jambs. If rain ever gets past the weatherstrip, it runs back out to the patio and stays off your subfloor.
Level, shimmed setting
The frame goes in plumb, with shims at the lock and hinge points. That keeps panels rolling or swinging without dragging and keeps the lock lined up.
Seal and trim
Low-expansion foam fills the gap, exterior sealant closes it, and new trim finishes the inside.
Adjustment and walk-through
We tune the rollers or hinges, set the lock strike, and show you how to keep the track clean.

When it's time for a new patio door

  • Panels that stick or come off the rails

    Worn-out rollers can do it. So can a frame that has racked, and the clay soil around Dallas shifts foundations enough to twist an opening. We figure out which one is going on before any talk of a new door.

  • Fog between the panes

    Haze you can't wipe off means the seal between the glass has failed. The insulating gas is gone, and the door lets in more heat than it should.

  • Water on the floor after rain

    Puddles or stained flooring near the threshold usually point to a missing pan or a failed sill. The longer it goes, the more subfloor gets soaked.

  • Glass that's hot to the touch

    Older single-pane or clear double-pane doors pass a lot of summer sun. Newer low-E glass cuts that down and helps the room stay cooler.

  • The lock won't catch

    If you have to lift or shove the panel to latch it, the door is out of line. That is a security problem as well as an annoyance.

Step by step, start to finish

  1. 1

    A free visit to your home

    We stop by, study the door and its opening, measure, and talk through door styles and glass. The written quote breaks the job into its separate parts.

  2. 2

    Placing the order

    Each patio door is made to fit your opening. You hear the expected wait when we order it, and we phone you to book the install as soon as it comes in.

  3. 3

    Removing the old door

    Your floors get covered, then the old door comes out. Any rot hiding under the sill gets photographed and priced for you before work continues.

  4. 4

    Installing and sealing

    First the pan, then the new frame, shimmed and set, followed by foam, flashing and caulk. The panels have to move freely before any trim goes up.

  5. 5

    Cleanup and last look

    Hardware gets adjusted, the lock gets tested and the track gets vacuumed. The old door and leftover scraps leave with us, and we walk you through the new door and take your questions.

Estimator in a navy polo and cap points to a cracked sash rail on a double-hung window on a brick house wall as the homeowner looks on; a drill and caulk gun rest on the sill.

What a new patio door costs depends on

Pricing comes after we see your opening with our own eyes. Two doors of equal width can land at very different totals once the glass, the frame and the sill condition are factored in. We have $0 Down on the whole project and 0% Financing options, and we're happy to explain both by phone.

Style and width of the door
A simple two-panel slider costs the least. Sliders with three or four panels and double hinged French doors run higher. Larger panels also need heavier glass and sturdier rollers or hinges.
Frame material
Vinyl, fiberglass and clad frames each differ in cost, in care, and in how they stand up to months of summer sun.
Glass choices
Low-E coatings, argon gas, tempered safety glass and built-in blinds between the panes all change the price.
Condition of the sill and framing
A sound sill keeps things straightforward. A soft subfloor, an opening that is out of square or a resized opening adds labor and lumber.
Trim and paint
Matching your existing trim, adding new exterior casing or painting the door inside and out each raise the total.

Patio door questions we hear

Something not covered here? (214) 239-1068

Can I switch from a sliding door to French doors?

Usually, yes, if the opening is wide enough. Hinged doors need clear floor space to swing, so we check furniture and rug room inside and patio space outside. We will tell you at the consultation whether it fits.

How long does a patio door install take?

A single door swap usually takes most of one day. Wider units or openings that need framing work can run longer. We give you a realistic plan before we start.

Why did my last patio door start leaking so fast?

Most of the time it was set without a sill pan or out of level, so water had nowhere to go. That's the first thing we look at on your current door. Fixing how the opening is built is what keeps the new one dry.

Will you damage my floors or walls?

We cover the floor and nearby walls before tear-out and work carefully around trim. Some interior trim may need replacing, and if so we tell you up front and include it in the quote.

Do I need a permit for a new patio door?

It depends on the job and where you live. A same-size swap is often simple, while changing the opening size can need more. We check what applies to your home and handle it if a permit is needed.

Covered brick back patio with a new black-framed sliding glass door flanked by matching black windows, a tool bag and broom on the concrete slab

Let's find out what your patio door is really doing

We'll come look at the door and the opening, tell you what we find, and give you a free quote. There's no cost for the visit.